ultra Isolation Transformers

Home | Profile | Products | Certifications | Contact Us
Product Range
Servo Star Catalogue
Our Company IEC Number 0512068801
Isolation & Ultra Isolation Transformer

Isolation and ultra isolation transformer

Transformers also provide an extremely useful feature called isolation, which is the ability to couple one circuit to another without the use of direct wire connections. There are applications where electrical isolation is needed between two AC circuit without any transformation of voltage or current levels. In these instances, transformers called isolation transformers having 1:1 transformation ratios are used.

Our Isolation Transformers isolate the equipments from noisy power line hence providing a better option to clients. These remove power line noise, surges, spikes and transients. It also provides high insulation resistance and provides complete electromagnetic and electrostatic shielding.

Our range of Isolation Transformers are designed as per the guidelines of ISO 2026 which gives an assurance to the customer on the high quality of the product. An isolation transformer does not have a direct electrical path from the power input side to the power output side. The term is also used to define how much electrical isolation exists between the input and output windings. For example when using line-voltage input transformers to power low voltage device handled by humans, a high degree of isolation is required for safety. Isolated transformers often use separate bobbins for the primary and secondary coil windings, but usually the windings are just wound on top of each other with insulation in between. There is usually an electrostatic shield between windings which is tied to transformer case.

Isolation Transformer Specifications
  Phase
:
Single Phase
  Input Voltage
:
220 Volts
  Output Voltage
:
220 Volts
  Transformer Ratio
:
1:1
  Power Factor
:
0.75 Lag to lead
  Frequency
:
50 Hz
  VI Electric strength
:
1500 V AC for 120 sec.
  Insulation esistance
:
More Than 100M Ohms.
  Capacitance Coupling
:
0.01 PF 100 db
  Common Mode attenuation
:
100 db
  Class Of Insulation
:
Class 'F'
  Losses
:
5%
  Ambient emperature
:
0-50o C
  Duty Cycle
:
Continuous
  Lamination
:
Cargo
  Construction
:
as per IS :2026
 
Ultra Isolation Transformer Specifications
  Phase
:
Three Phase
  Input voltage
:
415 Volts
  Output Voltage
:
415 Volts
  Systems Construction
:
Delta / Star
  Transformer Ratio
:
1:1
  Regulation
:
Better Than 4%
  Power Factor
:
0.75 Log to lead
  Frequency
:
50 Hz
  VI Electric strength
:
2500 V AC for 120 sec.
  Insulation Resistance
:
More Than 1000M Ohms.
  Capacitance Coupling
:
0.01 PF 100 b.b
  Common Mode attenuation
:
100 d.b
  Class Of Insulation
:
Class 'F'

 

 
Send Query
Name
Mobile
Email Id
Message